USDOT · MC · Company name · State numbers
Semi Truck Lettering Requirements
What a semi truck must display under the federal marking rule, which state numbers and decals some carriers add, and how to size and place the lettering on the cab doors.
What lettering does a semi truck need?
A semi truck operating under a USDOT number must display the carrier's legal name or a single trade name and "USDOT" followed by the number, on both sides of the tractor. The lettering must contrast sharply with the paint and be readable from 50 feet in daylight while the truck is stopped.
That's the federal rule in 49 CFR 390.21, and it applies to the self-propelled vehicle, so the tractor carries the marking, not the trailer. If another company's name also appears on the truck, the operating carrier's name must be preceded by "operated by." Everything else on the doors is either a state requirement or the carrier's choice.
| Marking | Required by | Notes |
|---|---|---|
| Legal or trade name | 49 CFR 390.21 | Both sides of the tractor |
| "USDOT" + number | 49 CFR 390.21 | Both sides, readable at 50 ft |
| "Operated by" before the carrier name | 49 CFR 390.21 | When another name is also shown |
| MC number | Not required by 390.21 | Many carriers still show it |
| CA number | California (CVC 34507.5) | Both sides, when required |
| IFTA decals | IFTA licensing | Exterior of both sides of the cab |
| Unit number | Carrier choice | Useful for fleets and dispatch |
Does a semi truck have to show the MC number?
The federal marking rule doesn't require the MC number; it requires the name and USDOT number. Many carriers still letter the MC number below the USDOT number, because some shippers and brokers ask for it, and it costs little to add. Use the exact number on your operating authority.
If you do add it, letter it in the same font and color as the USDOT number, slightly smaller or the same size, so the two read as one block. The USDOT number vs MC number guide explains what each number is for.
What size should semi truck lettering be?
There's no fixed letter height in the federal rule; the test is readability from 50 feet in daylight. On a semi, 3-inch USDOT and MC numbers are the practical standard, with the company name at 4 to 8 inches on the door. Bold block fonts in black or white, matched to the paint, read best.
| Element | Typical height |
|---|---|
| Company name | 4–8 in |
| City and state | 2–3 in |
| USDOT number | 3 in |
| MC number | 2.5–3 in |
| CA, KYU or other state numbers | 2–3 in |
| Unit number (cab or fender) | 3–6 in |
Matched door kit pairs from Same Day Vinyl cost $39.99 for 18 inches wide, $49.99 for 24, $79.99 for 30 and $99.99 for 36. The USDOT size guide explains the 50-foot test.
Where does the lettering go on a semi?
Put the company name, city and USDOT and MC numbers on both cab doors, below the window and above the step, where they're easiest to read. Keep clear of handles, hinges, mirrors and fuel tanks. Unit numbers often go on the hood, cab corner or fender, and IFTA decals on the exterior of both sides of the cab.
| Line | Example |
|---|---|
| Company name | SAMPLE TRANSPORT LLC |
| City, state | DELAND, FL |
| USDOT | USDOT 1234567 |
| MC | MC 765432 |
| State numbers, if any | CA 123456 |
Leased-on owner-operators often letter the carrier's name with "operated by" and the carrier's USDOT number, plus their own business name if the lease allows it. Use removable vinyl on leased trucks you'll return.
Which state numbers might a semi need?
Some states issue their own carrier numbers or tax decals. California requires a CA number displayed on both sides for carriers that need one; Kentucky taxes trucks over 59,999 pounds combined license weight under the KYU program; and other states have their own weight-distance programs. Check each state where you operate.
California's rule (Vehicle Code 34507.5) lets one vehicle on each side of a combination carry the CA number. For Kentucky, check with the Kentucky Transportation Cabinet whether you need to display the KYU number on the truck as well as register it. Same Day Vinyl adds any state number you provide to the door layout.
Who needs a USDOT number on a semi?
Almost every semi in commercial use needs a USDOT number: interstate trucks over 10,001 pounds GVWR or combined rating, and in Florida, intrastate commercial vehicles at 26,001 pounds or more. Hazmat and passenger carriers have their own thresholds. FMCSA's registration questions confirm what applies to you.
The who needs a USDOT number guide walks through the thresholds, and USDOT requirements by state covers intrastate rules in each state.
What material should semi truck lettering use?
Use cast vinyl for semi doors, because it conforms to rivets and gentle curves and holds up to washing, fuel and sun. ORAFOL rates its Oracal 751C cast film up to 8 years in black and white under moderate exposure. Reflective vinyl helps the name and numbers read at night on the highway.
Avoid magnets for required markings on a semi; they can slide or blow off at highway speed, leaving the truck unmarked. Permanent vinyl lettering is cheap enough that it's rarely worth the risk.
What should I send to order semi truck lettering?
Send the legal name exactly as on your FMCSA record, your USDOT and MC numbers, any state numbers, the tractor make, model and paint color, straight-on photos of both doors, the clear space in inches, your colors and logo, and whether old lettering needs removing. One complete request returns one quote and proof.
Use the truck door lettering designer to see your name, USDOT and MC numbers on a real truck door, or the fleet quote builder to list several tractors with unit numbers. Kits ship nationwide; installation is available anywhere in Florida by arrangement.
Does Same Day Vinyl check that my lettering is compliant?
Same Day Vinyl checks the proof against the name and numbers you send and lays out the lettering to the sizes you choose, but doesn't determine which rules apply to your operation. Confirm your requirements with FMCSA and each state where you run, then approve the proof.
Same Day Vinyl's owner has 18 years in vinyl and print and once ran J&J Express, a Connecticut trucking company, lettering its trucks himself, so layouts are built around what drivers and inspectors actually look for.
Do trailers need lettering too?
The federal marking rule applies to the self-propelled truck, so a trailer pulled by a marked tractor doesn't need the carrier's name and USDOT number under 49 CFR 390.21. Carriers still letter trailers with the company name, phone and unit numbers for branding, tracking and theft recovery, and some states have their own trailer rules.
| Marking | Why carriers add it |
|---|---|
| Company name and logo | Advertising on every mile |
| Trailer unit number | Dispatch, yard checks and maintenance |
| Phone or website | Recruiting and customer contact |
| Reflective conspicuity tape | Required safety marking on many trailers |
Conspicuity tape is a separate federal safety requirement for many trailers, not a lettering choice; use DOT-approved reflective tape for it. See contractor trailer lettering for trailer layouts.
How do I replace lettering when I change carriers or authority?
When you change carriers, get your own authority, or a lease ends, remove the old name and numbers completely before applying the new ones, so the truck never shows two USDOT numbers. Heat and a plastic scraper lift vinyl, and adhesive remover clears the residue without hurting the paint.
Order the new kit before the change date so the truck isn't running unmarked. Keep a photo of each lettered door with your fleet records, so replacement kits for damaged doors or new trucks can be matched exactly. Fleets that store an approved layout only change the unit number from one kit to the next, which keeps every truck consistent. Same Day Vinyl can produce a replacement door kit the same day for a rush fee, ship it, or install it anywhere in Florida by arrangement, including removal of the old lettering.
Can a semi carry both a company name and a lessor's name?
Yes. Under 49 CFR 390.21, when a name other than the operating carrier's appears on the truck, such as a leasing company or an owner-operator's business, the operating carrier's name must be preceded by "operated by" along with its USDOT number. Both names can appear, as long as it's clear who operates the truck.
Reviewed November 11, 2026 against: 49 CFR 390.21 marking rule · FMCSA: Do I need a USDOT number? · Caltrans: CA number · Kentucky KYU · UDOT display of credentials (IFTA decals). Rules and ratings change; confirm with the issuing agency or manufacturer.
