Boat names · Hailing ports · Stripes · Registration numbers
Custom Boat Graphics & Lettering in New Smyrna Beach, Daytona & Port Orange
Boat names, hailing ports, hull stripes, logos and registration numbers for boats in New Smyrna Beach, Daytona Beach and Port Orange, made in DeLand and installed by arrangement.
Where can I get custom boat graphics in New Smyrna Beach, Daytona or Port Orange?
Same Day Vinyl makes custom boat graphics for New Smyrna Beach, Daytona Beach and Port Orange boats from its shop in DeLand, about 25 to 30 miles inland. Order boat names, hailing ports, hull stripes, logos and registration numbers online or by phone, approve a proof, then pick delivery, shipping or installation by arrangement.
Boats on the Indian River Lagoon, Mosquito Lagoon, the Halifax River and out of Ponce Inlet see hard sun and salt, so every graphic is cut or printed on marine-suitable vinyl and laminated where printed. Same-day production is available for a rush fee that depends on the day's schedule.
| Graphic | Typical use | Starting point |
|---|---|---|
| Registration numbers | Both sides of the bow | Pairs from $12.99 (3 in) to $37.99 (8 in) |
| Boat name | Transom or hull sides | Quoted from name, font and size |
| Name and hailing port | Documented vessels | Quoted from layout |
| Hull stripes and accents | Sides of the hull | Quoted from length and colors |
| Logos and printed graphics | Fishing teams, charters, sponsors | Quoted from artwork and size |
| Console and helm decals | Interior labels and logos | Quoted by size and quantity |
What boat lettering do boats in Volusia County need?
Every Florida-registered boat needs its FL registration number on both sides of the forward half, in block characters at least 3 inches tall that contrast with the hull, with the validation decal on the port side within 6 inches of the number. Everything else, including names and stripes, is optional unless the boat is documented.
Documented boats show the vessel name and hailing port instead of a state number. For recreational documented boats, the name and hailing port go together on a clearly visible exterior part of the hull, in letters at least 4 inches tall, under 46 CFR 67.123. Most owners put them on the transom.
| Marking | State-registered boat | Documented boat |
|---|---|---|
| FL registration number | Required, both sides | Not displayed |
| Validation decal | Required, port side | Required in Florida, port side |
| Name and hailing port | Optional | Required, 4 in or taller |
| Stripes, logos, graphics | Optional | Optional |
How are boat names designed?
Send the name, your hailing port if you want one, a font style or example you like, colors and the space on the transom. Same Day Vinyl lays out the name to fit, adds outlines or drop shadows if you want them, and sends a proof showing exact size and colors before cutting. Changes are made on the proof.
Script and decorative fonts are fine for boat names, unlike registration numbers. Two-color names with an outline read best from the water, and a contrasting outline keeps a name visible on two-tone hulls.
What are custom hull stripes and accents?
Hull stripes are long vinyl bands along the sides of the hull, usually one to three colors, that freshen a faded boat or match a new canvas or engine color. They're cut from cast vinyl that conforms to the hull's gentle curves and are measured from the boat, so they follow your sheer line and fit the length exactly.
Stripes can replace faded factory graphics, cover scuffs along the rub rail line, or tie a boat into a team or business color scheme. Send side photos with a tape measure in frame, plus the colors you want, and the proof will show the stripe on your hull layout.
Do you make printed graphics and logos for boats?
Yes. Full-color logos, fishing team and tournament graphics, charter and rental branding, and sponsor decals are printed on an HP Latex printer and laminated for UV and water protection. Solid-color logos and lettering are cut from colored vinyl on a Roland cutter, which holds up longest outdoors.
Printed graphics suit photos, gradients and detailed logos; cut vinyl suits names, numbers and one- to three-color logos. Many boats combine both: a printed logo with cut lettering. See cut vs printed vinyl for the difference.
How long do boat graphics last in Florida?
Cast marine vinyl typically lasts several years on a boat in Florida; ORAFOL rates Oracal 751C cast film up to 8 years in black and white under moderate exposure, and Florida sun and salt shorten that. Covered or stored boats last longest. Rinse salt off after trips and avoid pressure washing edges.
| Habit | Why it helps |
|---|---|
| Rinse with fresh water after saltwater trips | Salt crystals wear edges and dull color |
| Cover or shade the boat when stored | UV is the biggest cause of fading |
| Don't pressure wash vinyl edges | Lifts edges and lets water under |
| Wax around, not over, fresh graphics for the first weeks | Lets the adhesive set fully |
| Replace faded registration numbers | They must stay readable to stay legal |
Can graphics be installed at my marina or home in Volusia County?
Yes, installation is available anywhere in Florida by arrangement, including at your home, marina or dry storage in New Smyrna Beach, Daytona Beach, Port Orange and Ponce Inlet, subject to the facility's rules and the weather. Registration numbers and simple names also ship pre-spaced for owners who want to apply them.
Installation needs a dry, shaded hull above about 50°F and access to both sides of the boat out of the water or at a dock where the bow can be reached safely. Removal of old graphics and adhesive can be added to the quote.
How do I get a quote for boat graphics?
Send photos of each side and the transom with a tape measure in frame, the boat's make, model and length, hull color, the names, numbers and graphics you want, your colors or artwork, and whether you need installation and where. One complete request returns one quote and proof.
Preview registration numbers in the boat number designer, or send everything through the quote form. You can also call or text (386) 227-6695. The boat lettering page has more examples of names and layouts.
Do you serve other nearby areas?
Yes. Same Day Vinyl serves boat owners across Volusia County and Central Florida, including Edgewater, Oak Hill, Ormond Beach, DeLand, DeBary and the St. Johns River, and ships boat lettering anywhere in the U.S. For Port Orange specifically, see boat lettering in Port Orange.
Freshwater boats on the St. Johns River and inland lakes follow the same Florida registration rules as saltwater boats, and the same vinyl works on both; freshwater just tends to be easier on edges than salt.
What does boat graphics work cost?
Registration number pairs cost $12.99 for 3-inch characters up to $37.99 for 8 inches. Boat names, hailing ports, stripes and printed logos are quoted from the size, number of colors, artwork and whether installation is needed. Installation and removal of old graphics are quoted by location, and the proof confirms the final price before anything is cut.
| Factor | Effect on price |
|---|---|
| Size and length | Larger names and longer stripes use more vinyl |
| Number of colors | Each outline or second color adds a layer |
| Printed vs cut | Full-color printed graphics need laminate |
| Removal of old graphics | Added time for heat, scraping and cleanup |
| Installation location | Quoted by distance and access |
| Rush production | Same-day fee depends on the schedule |
Can you match my boat's existing graphics?
Yes. Send close-up photos of the existing graphic with a tape measure in frame, the boat's make, model and year, and the colors, and Same Day Vinyl recreates the graphic for a replacement or the other side. Factory graphics can often be redrawn from photos; the proof shows the match before cutting.
If one side has faded more than the other, replace both so the colors match. Charter, rental and fishing-team fleets can store an approved layout, so each additional boat gets the same graphics with only the name or number changed, and reorders after storm damage or a hull repair are quick. For boats with factory stripes that have cracked, a new pair cut in a current marine color usually looks better than patching.
Can you letter jet skis, kayaks and paddleboards?
Yes. Personal watercraft need Florida registration numbers like any motorboat, and Same Day Vinyl makes compact pre-spaced pairs for jet ski hulls, plus names and graphics for kayaks, paddleboards and dinghies. Small hulls have tight curves, so send photos with a measurement and the proof will show what fits.
Reviewed November 11, 2026 against: Florida Statutes 328.48 · 46 CFR 67.123 documented vessel markings · ORAFOL ORACAL 751C data sheet. Rules and ratings change; confirm with the issuing agency or manufacturer.
